項 目
Item |
性 能
performance |
進氣口通經(mm)
Air inlet passage (mm) |
720 |
排氣口通經(mm)
Exhaust opening pass (mm) |
160 |
名義抽氣速度(l/s)無水冷阱
Nominal pumping speed (l / s)
without water cooling trap |
≥22000 |
名義抽氣速度(l/s)裝有水冷阱
Nominal pumping speed (l / s)
with water-cooled trap |
≥11000 |
有效抽氣速度(裝有水冷阱)
Effective pumping speed (with water-cooled trap) |
≥11000L/S |
極限壓力(Pa)(裝有水冷阱)
Ultimate pressure (Pa) (with water-cooled trap) |
≤5.0×10-5 |
空載臨界前級壓力(Pa)
No-load critical back pressure (Pa)
Use pump oil |
≥36 |
滿載臨界前級壓力(Pa)
Critical back pressure at full load (Pa) |
≥30 |
使用泵油
Pump oil |
DC705/275硅油
Silicone oil |
使用泵油量(L)
Pump oil volume (L) |
11 |
泵油返流率(裝有水冷阱)(mg/cm2.min)
Pump oil return rate
(with water cooling trap) (mg / cm2.min) |
<10-5 |
使用電量(KW)
Power consumption (KW) |
12 |
加熱方式
heating method |
加熱管浸入油中加熱
Heating tube immersed in oil to heat |
冷卻方式
cooling method |
強制水冷
Forced water cooling |
使用冷卻水流量(L/min)
Use cooling water flow (L / min) |
10 |
冷卻水連接口
Cooling water connection |
G3/8(8處) G1/8(2處)
G3/8-8 places;G1/8-2 places |
預熱時間(min)
Warm-up time (min) |
80 |
重量(Kg)
Weight (Kg) |
~380 |